EGO POWER+ LM2130SP Manual Del Operador página 39

NOTICE:
If the bolt rotates with the
motor shaft when loosening the bolt,
place another metal rod (e.g., a 3.5" long
screw bit) with diameter less than 1/4
inch (6.35mm) into the aligned holes in
the fan to act as another stabilizer
(Fig. 22).
5. Remove the outer bolt, flange, blade
set and fan from the shaft (Fig. 23).
6. Use a 9/16" (14mm) wrench to turn
the two nuts counterclockwise to
loosen them and then disassemble
the two blades (Fig.24).
NOTICE:
Save the two bolts and two
nuts for blade reassembly.
7. Sharpen the blades or replace with
a new blade set.
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC
22
23
Shaft
Blade Set
24
Bolt
Stabilizer 1
Stabilizer 2
Fan
Flange
Outer Bolt
Nut
39