EGO POWER+ LM2130SP Manual Del Operador página 33

Ocultar thumbs Ver también para POWER+ LM2130SP:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

MOWER OVERLOAD PROTECTION
To prevent overload conditions, do not try to remove too much grass at one time. Slow
down your cutting pace or raise the cut height.
Your mower has built-in overload circuit protection. When the mower is overloaded, the
motor will stop and the power indicator on the mower will flash orange. Remove the
battery pack from the mower. Check to see if grass has collected beneath the deck and
clear it if necessary, then install the battery and restart the mower.
BATTERY HIGH-TEMPERATURE PROTECTION
The battery pack will generate heat during operation. The heat dissipates more slowly
in hot weather. If the battery temperature exceeds 158°F (70°C) during operation,
the protection circuit will immediately turn off the mower to protect the battery
pack from heat damage. The mower-status indicator on the mower will off, the LED
on the battery(BA1120, BA1120-FC, BA1400, BA1400-FC, BA2240, BA2240-FC,
BA2800, BA2800-FC, BA4200, BA4200-FC) will flash orange and the LED on the
battery(BA1400T, BA1400T-FC, BA2800T, BA2800T-FC, BA4200T, BA4200T-FC) will
shine red.
Release the bail switch, wait until the battery pack cools down to approximately 152°F
(67°C), then restart the mower.
33
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Power+ lm2130sp-fcPower+ lm2130Power+ lm2130-fc

Tabla de contenido