Switching On The Appliance; Loading The Appliance - Hupfer TE-2/V19-26 Manual De Instrucciones

Chapter 5
Page 32
5.3.1

Switching on the appliance

DANGER
NOTE

Cover all the dispensing tubes with the covers to avoid heat loss.

Insert the mains plug into a suitable socket.

Switch on the appliance with the On / Off switch. The indicator integrated in the switch will light up to
show that the appliance is ready for operation.

Set the desired temperature using the thermostat. A continuous adjustment is possible within the 4
power ranges.
NOTE
5.3.2

Loading the appliance

NOTE
NOTE
Plate dispenser
TE-2/V19-26, 27-33 | TE-2/VK19-26 | TEH-1/V19-26, 27-33 | TEH-2/V19-26, 27-33 | TEUH-1/VS19-26 | TEUH-2/VS19-26, 27-33 | TEUH-2/VC19-26
EBR/V19-26, 27-33 | EBRH/V19-26, 27-33 | EBRH-2/V19-26
Hazardous electrical voltage
The electrical voltage may be considerably dangerous to limb and life of per-
sons and lead to injuries.
Only use the plug connection provided for this. The appliance should not be
operated with a damaged connecting line or other visible damages.
All work on the electrical installations should only be carried out by a certified
electrician or by authorised specialists under supervision and monitoring of a
certified electrician according to the certain electro-technical regulations.
Heated appliances
Some parts of this section relate exclusively to the heated appliances and do
not apply to the unheated models.
Crockery temperature
Depending upon the number and arrangement of the crockery stacks, the
required temperature of the crockery with the cover on and an initial crockery
temperature of at least 59 °F (15°C) will be reached after 2 to 3 hours.
Loading
Before the crockery items are inserted, the crockery guide and the stack
height must be set correctly.
Insert the items individually or in small safely manageable stacks.
Warm-keeping items
Metal-coated warm-keeping items filled with wax can also be heated up wrong
in the most powerful plate dispenser.
The plate dispenser's performance is not sufficient to melt the wax within the
metallic sheath. As a result, liquid-to-solid phase transition cannot take place
during heat emission, so that the warm-keeping function of the warm-keeping
items is drastically reduced.
Operation
Operation
4330000_A3