Inormal Machine Use; I1 Foreseen Use; I2 Characteristics Of Personnel Trained For Normal Machine Use; I2.1 Characteristics Of Personnel Enabled To Operate On The Machine - Electrolux ODOURLESS Manual De Istrucciones Para El Uso

RESIDUAL RISK
Crushing
Slipping or falling
Burns
Shearing of upper limbs
Electrocution
Falling from above
Tipping of loads
I NORMAL MACHINE USE
I1 Foreseen use
Our appliances are designed and optimised in order to
obtain high performance and efficiency.
This equipment is expressly designed for the extraction
and filtering of cooking steam and fumes in Electrolux
Lengthwise 6-10 Racks 1/1 oven models.
I2 Characteristics of personnel trained for
normal machine use.
The Customer must make sure that personnel for
normal machine use are adequately trained and skilled
in their duties, as well as ensuring their own safety and
that of other people.
The Customer must make sure his personnel have
understood the instructions received and in particular
those regarding work hygiene and safety in use of the
machine.
I2.1 Characteristics of personnel enabled to
operate on the machine
The Customer is responsible for ensuring that persons
assigned to the various duties:
• Read and understand the manual;
• Receive adequate training and instruction for their
duties in order to perform them safely;
• Receive specific training for correct machine use;
DESCRIPTION OF HAZARDOUS SITUATION
Interference by third parties, use of inadequate lifting or carrying equipment,
wrong manoeuvres.
The operator may slip due to the presence of water, dirt or residuals of silica
gel on the floor.
The operator deliberately or unintentionally touches some components inside
the machine without using gloves or allowing it to cool first.
The operator intentionally or unintentionally fingers in a fan that is on.
Contact with live parts during maintenance operations carried out with the
electrical panel powered. The operator intervenes (with a power tool or
without disconnecting the power to the machine) lying down on the wet floor.
The operator works on the machine using unsuitable systems to access the
upper part (e.g. rung ladders, or climbs on it).
During maintenance on the machine or the packing containing the machine
with the use of unsuitable accessories or lifting systems or with load
unbalanced.
Table 4

Residual risks

I2.1.1
The operator for normal machine use must at least have:
• Knowledge of the technology and specific experience
• Adequate general basic education and technical
• Including correct interpretation of the drawings, signs
• Sufficient technical knowledge for safely performing
• Knowledge of the regulations on work hygiene and
In case of a significant fault (e.g. short circuits, wires
coming out of the terminal block, motor breakdown,
worn electrical cable sheathing, etc.) the operator for
normal machine use must:
•
• Close the machine water supply by shutting off the
36
Characteristics of operator for normal
machine use
in operating the machine;
knowledge for reading and understanding the contents
of the manual;
and pictograms;
his duties as specified in the manual;
safety;
Immediately deactivate the machine, removing
the power plug from the panel where connected,
or by operating the main emergency stop
possibly present on the machine, or on the main panel
connected to it;
water;