How To Use The Vpap Menus; Ramp Screen; How To Use The Standard Menu - ResMed VPAP III Manual De Usuario

How to Use the VPAP Menus

The VPAP unit provides a set of functions arranged in menus and submenus. Via
the LCD screen, the menus and submenus allow you to view and change the
settings for a particular function. You can access the menus regardless of
whether the VPAP is in standby mode or delivering therapy.
Your clinician has preset the menu to either a standard view or a detailed view.
Both of these menus are explained below.
When the VPAP is turned on, a Welcome screen is displayed. After the device
self-checks are complete, the VPAP (or Ramp) screen appears.

Ramp Screen

If your clinician has set a maximum ramp time, the Ramp screen is displayed
after the Welcome screen. On the Ramp screen, you can immediately set a ramp
time. Ramp time is the period during which the pressure increases from a low
pressure to the prescribed treatment pressure. See “"Ramp time”" on page 15.
Ramp time can be altered in five minute increments (from OFF to a maximum
ramp time set by your clinician) by using the Up/Down key.

How to Use the Standard Menu

The standard menu allows you to view details about the time used and the
current software version of your VPAP. The Used (time) screen displays the total
number of hours for which the device has been used. It also displays the number
of days the VPAP was used out of the total number of days available for use.
Figure 1 summarises the VPAP standard menu series.
VPAP screen
RESMED VPAP III
menu
Figure 1: VPAP Standard Menu Series
To access the VPAP menus:
•
Press the Left key (menu) while the VPAP (or Ramp) screen is displayed.
To scroll through items within the menu:
•
Press the Up/Down key
To exit out of the menu:
•
Press the Right key (exit)
Ramp screen
RAMP: 20min
menu
USED: 00000hrs
View only
00000/00000days
SW: SX3650201
View only
exit
Options:
OFF, 5, 10, 15, 20, 25,
30, 35, 40, 45 min
How to Use the VPAP Menus 21