1.5
Name plate
1
2
3
4
5
Fig. 1
1 Manufacturer
2 Serial number
3 Serial number
4 ID number (internal calibration number)
5 Explosion protection labeling, e.g., ATEX
6 Year of manufacture, country of manufacture
1.6
Safety instructions for electrical installation
The electrical connection may only be made by authorized specialist personnel according to the
electrical plans.
The electrical connection information in the manual must be observed; otherwise, the electrical
protection type may be adversely affected.
Ground the measurement system according to requirements.
1.6.1
Safety instructions for operation
WARNING
Touching the surface can lead to burns if the measuring media are hot.
This can result in severe injuries or death.
Do not touch.
WARNING
If the measuring medium is allowed to escape in an uncontrolled manner, this can result in
severe injuries or death.
Check pipelines and gaskets on a regular basis.
WARNING
To avoid damage to the sensors, the device must be switched off for CIP cleaning.
CI/FMT400-VTS/VTCS-X1
Sensyflow FMT400-VTS, FMT400-VTCS
7 Model name
8 Power supply
9 Permissible ambient temperature
10Measured medium temperature
Safety
6
7
8
9
10
G01001-01
EN - 7