Tabla de contenido
Power Connector
• Check the voltage and current capacity of the power source. The rated power to operate the CAMCOLD5 is
12VDC / 500mA.
• After connecting the power adapter wires to the included terminal block, plug into the power connector.
• Mind the polarity of the connector.
Video Out Connector
• Connect with a coaxial cable with BNC connector.
RS485 Connector
• After assembling the communication wires and the included 2-pin terminal, plug into the connector.
6. Remarks
• Check the power cable before powering the camera.
• The camera ID must be identical to that of the target camera. The camera ID can be checked by reading the DIP
switched of the camera.
• If your controller supports multiple protocols, the protocol must be changed to match that of the camera.
• After changing the camera protocol by modifying the DIP switches, the change will be effective after a camera
rebooting.
• Since the operation method can be different for each controller, refer to the manual of your controller if the
camera does not respond correctly.
7. Controlling the Dome Camera
a. Selecting the Camera
• Choose a camera by pressing the camera number 1 – 99 and the CAM key.
• Press -1 to choose the previous camera or press +1 to choose the next camera.
Example: Selecting camera n° 2.
o Press 2 and the CAM key to select camera n° 2.
o After having selected the camera, press -1 to select the previous camera or press +1 to select the next
camera.
b. Controlling the P/T and the Lens
• Select a camera (see "Selecting a Camera").
• Press Z-, Z+, F- or F+ to control the P/T or tilt the joystick to control the lens.
Example: Controlling the P/T of camera n° 2.
o Press 2 and the CAM key to select camera n° 2.
o Tilt the joystick to control the camera P/T or use the Z-, Z+, F- or F+ key to control the lens.
c. Setting Up the Preset
• Select a camera and set the P/T and the lens to the desired position.
• Press the F1 key and press 8.
• Define the preset number (1 – 32).
• Press PRE to confirm.
CAMCOLD5
- 4 -
VELLEMAN
Tabla de contenido
Solución de problemas
