Velleman CAMCOLD5 Manual De Instrucciones página 3

4. Locate the three transparent pins
on the camera and align them
with the three slots of the
mounting plate.
b. Wall Mounting
1. Remove the top cover
of the mounting
bracket.
5. Pass the cable through
the hole on the upper
side of the bracket.
5. Connection
CAMCOLD5
5. Fix the camera into the mounting
plate by pushing and twisting.
2. Fix the mounting plate
on the mounting
bracket using the
included screws.
6. Align the pins on the
camera with the slots
on the bracket. Push
and twist the camera so
it snaps into the
bracket.
6. Now, mount the clear dome onto
3. Mark the position of the
holes (68mm spacing)
of the mounting bracket
on the wall. Slightly
screw the screws into
the wall.
7. Assemble the top cover
of the bracket and fix it
with the included
screws.
- 3 -
the camera by turning it. Make
sure not to leave fingerprints on
the dome.
4. Now, slide the
mounting bracket over
the screws and make
the screws fit into the
slots of the bracket.
Tighten the screws.
8. Now, mount the clear
dome onto the camera
by turning it. Make sure
not to leave fingerprints
on the dome.
VELLEMAN