Ryobi EAG950RB Manual De Utilización página 10

GB
FR DE ES
„ Ensure that the wheel is correctly seated over the boss
on the disc flange and clamp nut, with the flat side of
clamp nut facing down.
„ Depress the lock button located on the right side of
gear case.
„ Using the wrench provided, tighten the clamp nut in a
clockwise direction.
Check carefully whether or not there are cracks in the
wheel. Replace a cracked wheel immediately.
TOOL-LESS STANDARD
GRINDING/CUTTING STONE
See ¿ gure 12 - 13.
Release the wheel guard lock lever then turn the tool-less
wheel guard to the desired position. The maximum turning
angle is 90° on either side; otherwise the guard cannot
be locked.
FULL-CLOSED TOOL-LESS WHEEL GUARD FOR
CUTTING METAL
See ¿ gure 14 - 15.
Lock and unlock protection guard for cutting wheel.
LIVE TOOL INDICATOR
This tool features a live tool indicator which illuminates as
soon as the tool is connected to the supply. This warns the
user that the tool is connected and will operate when the
switch is pressed.
MAINTENANCE
After use, check the tool to make sure that it is in good
condition.
It is recommended that you take this tool to a Ryobi
authorized service center for a through cleaning and
lubrication at least once a year.
Do not make any adjustments while the motor is in
motion.
Always disconnect the power cord from the socket
before changing removable or expendable parts
(grinding disc, cutting disc etc.), before lubricating or
working on the unit.
IT NL PT DK SE
WARNING
WHEEL GUARD
WARNING
FI NO RU PL CZ
English
To ensure safety and reliability, all repairs should be
performed by an authorized service center or other
quali¿ ed service organization.
FOR
5
HU RO LV LT EE
WARNING
HR SI SK GR TR