Cleaning the Juicer
Partial Cleaning
The juicer should be cleaned frequently between operations. Do not allow juice to dry on juicer parts. To
give the juicer a partial cleaning:
1. Unplug the juicer.
2. Remove all pulp and seeds from the reamer, strainer, and stainless steel bowl.
3. Wipe all parts with a clean, damp cloth.
Full Cleaning
1. Unplug the juicer.
2. Remove the following parts from the base: splash cover, reamer, strainer, and bowl.
3. Remove all pulp and seeds from the removed parts.
4. All the removed parts may be washed in a commercial dishwasher or hand washed using warm water
(120ºF/49ºC) and liquid detergent.
5. Wipe the base, motor shaft, and splash cover with a clean, soft cloth and mild, nonabrasive detergent.
NOTE: Do not wash the base in a sink or spray water on it.
6. Reassemble the juicer in the reverse order.
Troubleshooting Guide
Problem . . .
Solution . . .
Juice will not
• Check to see if the strainer or spout is plugged with seeds or pulp from the last use.
fl ow through
container spout.
Juicer will not
• Make sure enough pressure is applied to the fruit during operation.
ream fruit.
• Make sure the reamer is pushed all the way down onto the motor shaft.
Motor will not
• Motor has stalled and/or motor cutout switch has opened. Unplug the juicer and allow
run.
the unit to cool.
• Make sure excessive pressure is not applied to fruit during operation.
• Make sure juicer is securely plugged into outlet and power switch is fully depressed in
the I (ON) position.
Juice has bitter
• Make sure excessive pressure is not applied to fruit during operation.
taste, rind in
• Too much pressure will allow rind in juice, which is bitter.
juice.
Replacement Parts
For replacement parts, see "Technical Services" on page 2 for ordering.
Part Description
96700 Lemon/Lime Reamer
96700 Orange Reamer
96700 Grapefruit Reamer
96700 Strainer
96700 Stainless Steel Bowl
96700 Splash Cover
6
Part Number
596700
596701
596702
596703
596704
596705