Vimar Elvox ZD08 Manual Para El Conexionado Y El Uso página 15

17.1 Enrolling Primary and Secondary Codes using the Standard Method
1. Enter Programming Mode.
2. Press "7" to enter Menu 7: the Door LED will turn orange.
3. Enter the 3-digit User Slot number between 001 to 500 that you wish to enroll a Primary or Secondary code to.
(For example, the User Slot 003 represents User #
- If the selected slot has no Primary Code, the Mode LED will flash green, indicating that the controller is ready to
accept a Primary Code.
- If the selected slot already has a Primary Code but no Secondary Code, the Mode LED will flash red, indicating that
the controller is ready to accept a Secondary Code.
- If the selected slot already has a Primary and Secondary Code, you will hear a long beep and the controller will return
to Normal Mode.
4. Enter the 4-digit PIN that you want to assign as the Primary or Secondary Code for this slot number. If the PIN that is
entered is valid the Mode LED will stop flashing and then the controller is ready for you to enter the next 3 Digit slot
number (refer to step 3) that you want to assign a code to.
5. press the "#" key to move to the next slot number (refer to step 4). If you do not wish to continue enrolling codes,
press the "#" key twice and the controller will return to Normal Mode.
17.2 Enrolling Secondary Codes using the Code Search Method
1. Enter Programming Mode
2. Press "7" to enter Menu 7: the Door LED will turn Orange
3. Enter the 3-digit User Slot number 000, the Door LED will flash Orange: the controller is now waiting for the Primary
Code of the User you want to add a Secondary Code to.
4. Enter the 4 Digit PIN Code of the Primary Code: the Mode LED will flash red (If the Primary Code entered is not valid,
you will hear a long beep and the ZD08 will continue to wait for a valid Primary Code).
5. Enter the 4-digit PIN Code to be used as the Secondary Code., If the Secondary Code is valid the controller will beep
three times and return to Normal Mode. (If the Secondary Code is invalid the controller will make a long beep and
then the ZD08 will continue to wait for a valid Secondary code to be entered).
18. Deleting Primary & Secondary Codes
There are two methods to delete Primary and Secondary codes, the Standard Method and the Code Search Method.
When deleting a User Slot, both the Primary Code and the Secondary code are erased.
18.1 Deleting Primary and Secondary Codes using the Standard Method
1. Enter Programming Mode.
2. Press "8" to enter Menu 8: the Mode LED will turn red.
3. Enter the 3-digit User Slot codes you wish to delete: The Mode LED will flash red indicating the controller is waiting
for the Programming Code to confirm the deletion. If the User Slot is empty you will hear a long beep and the ZD08
will return to Normal Mode.
4. Enter your Programming Code to confirm the deletion: If the Programming Code is valid, you will hear three beeps
and the ZD08 will return to Normal Mode (If the Programming Code is invalid, you will hear a long beep and the ZD08
will return to Normal Mode).
18.2 Deleting Primary and Secondary Codes using the Code Search Method
1. Enter Programming Mode.
2. Press "8" to enter Menu 8: the Mode LED will turn red.
3. Enter the 3-digit User Slot 000: the Door LED will flash orange.
4. Enter the 4-digit PIN Code of the Primary Code belonging to the user you want to delete: the Mode LED will flash
red (if the PIN Code is invalid, you will hear a long beep and the Mode LED will not flash).
5. Enter your Programming Code to confirm the deletion: If the Programming Code is valid, you will hear three beeps
and the ZD08 will return to Normal Mode (If the Programming Code is invalid, you will hear a long beep and the ZD08
will return to Normal Mode).
EN
GREEN
Mode
Door
ORANGE
?
?
?
Mode Door
GREEN GREEN
Mode
Door
RED GREEN
Mode Door
GREEN
Mode
Door
RED ORANGE
0 0
0
Mode
Door
ORANGE
Door
Mode
ORANGE
RED
Mode Door
GREEN
Mode
Door
RED ORANGE
? ?
?
Mode
Door
RED ORANGE
Mode
Door
GREEN
Mode
Door
ORANGE
RED
0 0
0
Mode
Door
RED ORANGE
? ? ?
?
Mode Door
RED ORANGE
13