Vimar Elvox ZD08 Manual Para El Conexionado Y El Uso página 11

5. Modes of Operation
The ZD08 has 3 Modes of Operation:
1. Normal Mode
Normal Mode is the default modeand the Mode LED is green. In Normal Mode the door is locked until a Primary Code is presented to the controller.
2. Bypass Mode.
In Bypass mode the "Mode" LED is orange.
In Bypass Mode, access to the premises is dependent
on whether the controller's Lock Strike Relay "A" is programmed for Fail Safe Operation or Fail Secure Operation.
- When the Lock Strike Relay "A" is programmed for Fail Secure Operation, the door is locked until the "
- When the Lock Strike Relay "A" is programmed for Fail Safe Operation, the door is constantly unlocked.
3. Secure Mode
In secure mode the "Mode" LED is red. Only Secure
Users can access the premises during the Secured Mode.
A Secure User must enter their Primary and Secondary Codes to gain entry. After entering their Primary Code the Door LED will flash green for 10 seconds,
during which the Secondary Code must be entered.
5.1 Changing the Modes of Operation
5.1.1 Changing from Normal Mode to Secure Mode:
The default factory setting for the Normal / Secure Code is 3838.
1. Enter the 4-digit Normal / Secure Code. Mode LED will flash red
2. Press the "#" key to confirm the Mode change. Mode LED is red.
5.1.2 Changing from Secure Mode to Normal Mode:
The default factory setting for the Normal / Secure Code 3838.
1. Enter the 4-digit Normal / Secure Code. Mode LED will flash green.
2. Press the "#" key to confirm the Mode change: the LED will turn green. The ZD08 Auxiliary Input can also be used
to switch the Mode of Operation from Normal to Secure and vice versa. (see par.13).
5.1.3 Changing from Normal Mode to Bypass Mode:
To set the Normal/Bypass code refer to par. 14).
1. Enter the 4 digit Normal / Bypass Code. Mode LED will flash orange.
2. Press the "#" key to confirm the Mode change. Mode LED will turn orange.
5.1.4 Changing from Bypass Mode to Normal Mode
To set the Normal/Bypass code refer to par 14.
1. Enter the 4 digit Normal / Bypass Code. Mode LED will flash green.
2. Press the "#" key to confirm the Mode change. Mode LED will turn green.
EN
Mode Door
GREEN
Mode Door
ORANGE
Mode Door
RED
*
" button is pressed.
Mode
GREEN
Mode
RED
Mode
RED
Mode
RED
Mode
GREEN
Mode
GREEN
Mode
GREEN
Mode
ORANGE
Mode
ARANCIO
Mode
ORANGE
Mode
GREEN
Mode
GREEN
Door
Door
Door
Door
Door
Door
Door
Door
Door
Door
Door
Door
9