Vimar Elvox ZD08 Manual Para El Conexionado Y El Uso página 14

14. Changing the Normal / Bypass Code
1. Press "5" to enter Menu 5: the Mode LED will flash orange.
2. Enter the 4-digit code (different to 0001) to enable Bypass Code.To disable Bypass Code enter the 4-digit code 0000.
3. The ZD08 returns to Normal Mode: the Door LED will turn off and the Mode LED will turn green.
15. Defining Auxiliary Inputs/Outputs
1. Enter Programming Mode.
2. Press "6" to enter Menu 6: the Mode LED will flash green.
3. Construct the 4-digit code using the instructions below
ED08 returns to Normal
Mode: The Door LED will turn off and the Mode LED will turn green.
Auxiliary Auxiliary
Mode Input
0 REX-2
1 Normal / Secure
2 Normal / Secure
3 Normal / Secure
4 Normal / Secure
5 Door Monitor
6 Door Monitor
7 Door Monitor
8 LED Ctrl –
9 LED Ctrl –
16. Setting Fail Safe/Secure Operation and Lock
Strike Release Time
1. Enter Programming Mode
2. Press "6" to enter Menu 6: the Mode LED will flash green.
3. Construct the 4-digit code using the instructions below:
First Digit:
0 for Fail Secure,
1 for Fail Safe
Second Digit: 0
Third and Fourth Digit: Lock Strike Time, enter 1 to 99 seconds
For example: 0 0 1 2 means: Fail Secure Operation, with a 12 second Lock Strike release time.
17. Enrolling Primary & Secondary Codes
Primary Codes
- Primary Codes can only be enrolled to an empty User Slot, i.e. a slot where there is no existing Primary Code.
- Primary Codes must be unique, i.e. one users Primary Code may not be the same as another users Primary Code.
- Primary Codes cannot be the same as any system codes, such as the Normal / Secure Code or Open Code.
- Users who hold a Primary Code can gain entry only during Normal Mode.
Secondary Codes
- Secondary Codes can only be enrolled to User Slot that already has a Primary Code enrolled but no Secondary Code.
- Secondary Codes do not have to be unique, i.e. multiple users can all hold the same Secondary Code.
- Secondary Codes cannot be the same as any system codes, such as the Normal / Secure Code or Open Code.
- Users who hold Secondary Codes can gain entry in any Mode of Operation.
Enrolling codes
There are two methods to enroll Primary and Secondary codes, the Standard Method and the Code Search Method.
A. The Standard Method is mainly used when the User Slot number for the user you wish to program is known. You can program both Primary and Secondary
Codes using the Standard method.
B. The Code Search Method is mainly used when enrolling a users Secondary Code and the User Slot Code is unknown. The Code Search method only
works if a user's Primary Code is already enrolled but the Secondary Code is not.
12
Auxiliary Ouput Aux.
Activated On Relay
Valid Code or REX-2 N.O.
Valid Code N.O.
Bell Button (*) N.O.
Tamper Event N.C.
Direct Shunt N.O.
Shunt N.C.
Forced Door N.C.
Door Ajar N.C.
Red Valid code N.O.
Green Valid code N.O.
Time Settings
(All times and delay are in seconds)
01 to 99 Aux. Relay Release Time
00 Aux. Relay Toggles
01 to 99 Aux. Relay Release Time
00 Aux. Relay Toggles
01 to 99 Aux. Relay Release Time
00 Aux. Relay Toggles
01 to 99 Aux. Relay Release Time
00 Aux. Relay activated by Tamper
00 to 99 Shunt time
00 to 99 Maximum Shunt Time
00 to 99 Forced Delay
00 to 99 Ajar Delay
01 to 99 Aux relay release time
00 Aux relay toggle
01 to 99 Aux relay release time
00 Aux relay toggle
Mode Door
VERDE
Mode
Door
ROSSO VERDE
?
?
2
AUX MODE
Time settings
Mode
VERDE
Mode
VERDE VERDE
?
?
?
?
Door
Door
?
EN