Haier HLT23E Manual Del Usuario página 19

English
3. Connect the other end to their respective washer inlet located at the
rear of the washer.
Note: Hot water needs to be at a temperature of at least 120˚F – 140˚F.
(49˚C- 60˚C) for the soap to dissolve and to avoid soap residue
remaining on clothes.
4. Install the drain hose hook to the outer drain hose tube. Using the drain
hose clamp, attach the drain hose to the unit as shown below.
5. Plug in power cord into a regular 115 volt / 60 Hz, 15 amp outlet.
17