Operation Procedure - Panasonic AK-HC1800G Manual De Instrucciones

Operation procedure

1
Turn on the power of each
equipment.
2
Properly adjust the light for the
object.
3
Adjust the flange back of the lens,
the iris and the focus.
 Flange back must be adjusted when
the camera is used for the first time
or after replacement of the lens.
4
Adjust the white balance.
 This adjustment is needed when the
camera is used for the first time or
after leaving unused for a long time.
 The adjustment is necessary when
the lighting condition or brightness is
changed.
 After adjusting the white balance
once, re-adjustment is not needed
under the same condition.
5
Adjust the black balance.
 This adjustment is needed when the
camera is used for the first time or
after leaving unused for a long time.
 The adjustment is necessary when
the ambient temperature is greatly
changed or at the change of season.
 After adjusting the black balance
once, re-adjustment is not needed
under the same condition.
6
Start shooting.
(After shooting, be sure to turn off the
power of each equipment connected.)
- 9 (E) -