Information On Safety; Important - Master BCM 19AB Manual De Instrucciones

en
1... SAFETY INFORMATION
it
2... UNPACKING
de
3... ASSEMBLY AND INSTALLATION
(ONLY FOR QUALIFIED PERSONNEL)
es
4... OPERATION
fr
5... CLEANING AND MAINTENANCE
nl
6... CONTROL PANEL ERROR DIAGNOSTICS
7... TROUBLESHOOTING
pt
da
IMPORTANT: READ AND UNDERSTAND THIS OPERATIONAL MANUAL PRIOR
fi
TO ASSEMBLING, STARTING UP OR CONDUCTING MAINTENANCE ON THIS
COOLER. USING THE COOLER INCORRECTLY CAN CAUSE SERIOUS OR FATAL
no
INJURIES. KEEP THIS MANUAL FOR FURTHER REFERENCE.
sv
pl
►►►1. INFORMATION ON
ru
SAFETY
(Pic. 1)
cs
IMPORTANT: This appliance is not
hu
suitable for use by persons (including
sl
children) with reduced physical, sensory
or mental capacities or who lack experi-
tr
ence or knowledge unless supervised
hr
by a person responsible for their safety.
Children must be supervised to make
lt
sure they do not play with the appliance.
►1.1. During installation, the electrical
lv
connection, water connection, use and
et
maintenance of the cooler, comply with
all local regulations and standards in
ro
force.
►1.2. The cooler must only be installed,
sk
adjusted and serviced by qualified per-
bg
sonnel.
►1.3. Use this appliance to cool, dehumid-
uk
ify, ventilate or remove dust.
bs
►1.4. In order to prevent the risk of fire
or serious injuries, install the cooler at
el
a safe distance from heat sources (fire-
places, fire, etc.), from sparks (welding
zh
machines, electrical panels, etc.) or from
combustion fumes (hoods, chimney
flues, etc.).
►1.5. Improper wiring or improper instal-
lation can cause hazards or serious
damage.
►1.6. Before carrying out any operation,
make sure that the cooler, the power
PARAGRAPH SUMMARY
supply cable, the control panel, etc., are
perfectly dry, in order to prevent any
hazard or serious damage (never work
with wet hands).
►1.7. Only install outdoors.
►1.8. The cooler must be installed on a
stable and level structure, so as to pre-
vent any risk (the structure and the plugs
must be adequate to support the weight
of the cooler).
►1.9. The minimum safety distance rec-
ommended between the cooler and walls
or other items is 0.5 m.
►1.10. A 0.8 m
of air supplied to the cooler must be
provided (always ensure an exchange
of air within the cooled environment).
In the event of forced air ventilation, the
amount extracted should be less than
85% of the air intake. Forced ventilation
can be combined with natural ventila-
tion.
►1.11. Power the cooler solely with the
voltage and frequency specified on the
nameplate, using cables of suitable sec-
tion (the supply voltage must not vary
more than ± 5% from the value stated on
the nameplate).
►1.12. Make sure that the cooler is earthed
properly.
►1.13. Make sure the polarities are re-
spected when connecting to the mains.
We recommend using a suitable residual
current device (see nameplate).
outlet for every 3,600 m
2
/h
3