Stainless Steel And Overlay Series Both 36" And 42" Models Have The Same Cabinet Side Trim - KitchenAid Stainless Steel 36 Serie Guia De Instalacion

Stainless Steel and Overlay Series Both
36" and 42" models have the same
cabinet side trim
All factory parts are available through your KitchenAid dealer or
by calling KitchenAid Parts and Accessories at 1-800-442-9991.
In Canada, call 1-800-807-6777.
Overlay Series Door Handle Kits
The following handle style is available. Contact your KitchenAid
dealer or KitchenAid Parts and Accessories at 1-800-442-9991. In
Canada, call 1-800-807-6777.
Knurl grip handle with chrome endcaps
W10782871 - French Door Bottom Mount Handle Kit
W10782874 - Two Door Bottom Mount Handle Kit
Refrigerator and Side Trim Dimensions
The width and height of a side panel are determined by the type
of installation you are planning.
NOTES:
The dimensions shown are actual product dimensions and
■
may not reflect the needed panel installation dimensions.
The side panel should be a minimum of 1/2" (1.27 cm) thick to
■
avoid warping.
If the opening depth is 25" (63.5 cm) or more, you may want
■
to install a support board on the rear wall.
23 19 ⁄ "
32
(59.9 cm)
23 ⁄ "
17
32
(59.8 cm)
23 15 ⁄ "
32
(59.6 cm)
14
11/16"
(18.0 mm)
1/2"
(12.2 mm)
23 19 ⁄ "
32
(59.9 cm)
23 ⁄ "
17
32
(59.8 cm)
9/16"
23 15 ⁄ "
32
(13.9 mm)
(59.6 cm)
5/8"
(15.7 cm)
Installation Dimensions - Option 1
1. Measure the distance from point A (as shown) to the back
wall. Add 1⁄16" (1.6 mm) to this measurement to allow the side
panel to fit into the trim.
A
2. If the panel is more than 11/32" (8.7 mm) thick, rout the front
edge to allow the side panel to fit into the trim.
Installation Dimensions - Option 2
1. Measure the distance from point A (as shown) to back wall.
A
2. Rout the front edge of the support board or attach a 11/32"
(8.7 mm) board to hold the panel in the cabinet side trim.