Idiomas disponibles
Idiomas disponibles
36
MAINTENANCE
All operations should be performed with the electrical supply disconnected. After removing the casing, it is
possible to clean the photo resistance, inspect the motor, the electromagnetic valve, the transformer and the air
intake control.To reach the fan and butterfly valve, the over-head plate and component mount must be
removed.This will be attached in the standard service position.This operation will also make the combustion
head easy to remove.
To clean and inspect the choke-electrode, normally, one should extract the head group by moving the over-
head plate.
PHOTO RESISTANCE
Unscrew from position and clean the photosensitive window with a dry cloth.
PUMP FILTER
Close the fuel line valve, take off the pump cover, take out the filter, clean it with gasoline, rinse it with light oil
and re-assemble carefully.
FUEL LINE FILTER
Close the fuel line valve, take off the filter cover, unscrew the filter, and clean the filter carefully. Re-assemble
carefully.
FAN & BUTTERFLY VALVE
It is sufficient of take off the cover in order to reach the main components. Maintenance of the combustion head
should be carried out as follows:
● Take out the screws and take off the cover.
● Unscrew and take out the over-head plate and place it in service position.
● In order to reach the fan, remove the screws from the lower plate to unhook the electrical coupling.
Capítulos
