Panasonic AK-HC1800G Instrucciones De Operación página 50

Setting of menu items
 SETTING menu
[3] GEN-LOCK
[4] PIX DEFECT(AUTO)
GEN-LOCK INPUT [BNC, DSUB]
For selecting whether the sync signals are to
be input from the BNC or D-SUB connector.
H PHASE-COARSE [–060 to +060]
For roughly adjusting the horizontal phase.
H PHASE-FINE [–045 to +045]
For finely adjusting the horizontal phase.
SD-HD PHASE CRS [–4 to +4]
For roughly adjusting the phase of the HD
video signals when SD sync signals have
been input.
SD-HD PHASE FINE [–99 to +99]
For finely adjusting the phase of the HD
video signals when SD sync signals have
been input.
AUTO DETECTION [READY, ACTIVE]
When ACTIVE is selected by the ENTER
operation, automatic defect compensation
processing* is performed, and when this
processing is completed, the status returns
to READY.
The time taken for the processing differs
depending on the number of defects.
* Execute automatic defect compensation
processing after supplying the power to
the camera at the normal temperature for at
least two hours.
- 49 (E) -