HP deskjet 450 Manual De Instrucciones página 23

LED indication
Power LED on, Resume LED blinks,
Right print cartridge LED turns on
twice as long as off.
Power LED on, Resume LED on,
Right print cartridge LED turns on
twice as long as off.
Infrared LED on.
Power LED, Resume LED, Left and
Right print cartridge LEDs cycle at
fast rate.
Explanation and recommended action
Ink service module almost full.
• If you have a replacement for the ink service module, replace it
immediately by following the instructions that come with it.
• Otherwise, visit www.hp.com/support/dj450 or see Customer Support
to get a replacement.
In the meantime, you can press the Resume button to continue printing,
but this LED error state will remain until the ink service module is
replaced. When the ink service module is full, the printer will stop
printing.
Ink service module full.
• If you have a replacement for the ink service module, replace it
immediately by following the instructions that come with it.
• Otherwise, visit www.hp.com/support/dj450 or see Customer Support
to get a replacement.
In the meantime, you can remove the black print cartridge and print
using only the tri-color print cartridge. The color results and print speed
may be affected. See Single-cartridge printing mode in the onscreen
user's guide.
Printer is receiving infrared transmission.
• No action required.
Printer error.
• Press the Resume button to print the error code. Press the Power
button to reset the printer.