Switching The Top Burner On And Off; Switching The Oven On And Off - Angelo Po 1N1FAGV Manual De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Lighting
Turn on the gas supply tap.
1)
Press the knob
2)
(pos.
) to light the pilot light.
1
Keep the knob pressed for about 15 sec. to
3)
prime the thermocouple.
Turn the knob (A) anti-clockwise (pos.
4)
the burner.
Press the knob
5)
clockwise to adjust the power of the fl ame
down to the minimum setting.
Turning off
Turn the knob (A) clockwise (pos. 1) to turn the
1)
burner off . The pilot light will remain on to allow
the burner to be re-lit.
Press the knob
2)
to turn off the pilot light.
Turn off the gas supply tap to ensure safety.
3)
Lighting
Important
At fi rst switch-on, preheat as appropriate.
Turn on the gas supply tap.
1)
Press the knob (A) and turn it anti-clockwise
2)
GB
(pos. 1), while keeping button (B) pressed, to
light the pilot light.
Keep the knob pressed for about 15 sec. to
3)
prime the thermocouple. The pilot light can
also be lit by hand through the hatch (C).
Press the knob (A) and turn it anti-clockwise
4)
(pos.2) to between the minimum and maxi-
mum temperature and wait for the warm-up
time before using the oven (see table).
Temperature °C
Time in minutes
3319990_ut_rev.2_GB

SWITCHING THE TOP BURNER ON AND OFF

and turn it anti-clockwise
(A)
and turn it gradually anti-
(A)
and turn it clockwise (pos. 3)
(A)

SWITCHING THE OVEN ON AND OFF

Min
100 140 180 210 240 270 280
6' 8' 10' 12' 14' 16' 18'
) to light
2
4
Max
- 10 -
A
A
3
B
1
A
3
1
2
A
C
2
2
ENGLISH
Tabla de contenido

Solución de problemas

loading

Tabla de contenido