Tool Settings; Deactivating The Shock Warning Function - Hilti PRA 300 Manual De Instrucciones

6.3.4 Tool settings

Shock warning sensitivity
Inclined plane mode units
Units
Wireless connection
Settings that affect the rotating laser only become effective when the rotating laser is switched on and a wireless
connection has been established. Pressing the "Back" key

6.3.4.1 Deactivating the shock warning function

1. Switch the rotating laser on (see ??).
2.
Press the "Deactivate shock warning" key
The shock warning deactivation LED lights constantly, indicating that the function has been deactivated.
If the shock warning function is deactivated, the tool no longer reacts to shock (i.e. when bumped or shaken).
3. To return to standard operating mode, switch the tool off and then switch it back on again.
6.3.4.2 Inclined plane mode units
Under "Inclined plane mode units" the units to be used when entering an inclination can be set to percent, degrees or
per mille.
1. Press the "Menu" key
.
on the PRA 300.
High vibration, low sensitivity to shock
Medium
Low
Percent
Degrees
Per mille
Millimeters
Inches
On
Off
takes you back to the main menu.
en
17