Programming Cooking - SCHOLTES SCHXL 897E D E Manual De Instrucciones

Observing these suggestions will guarantee perfect results. If you wish to place
GB
food in a preheated oven, wait for the preheating stage to be completed (this
will be signalled by a series of beeps). The temperature is set automatically,
according to the cooking mode selected; however, you may adjust it to suit
your recipe.
You can also set a cooking duration with an immediate or delayed start.
MULTILEVEL mode
All heating elements and the fan are activated. Since the heat remains constant
throughout the oven, the air cooks and browns food in a uniform manner. A
maximum of two racks may be used at the same time.
LOW TEMPERATURE modes
This type of cooking can be used for proving, defrosting, preparing yoghurt,
heating dishes at the required speed and slow cooking at low temperatures.
The temperature options are: 40, 65 and 90°C.
PIzzA mode
The top and circular heating elements switch on and the fan begins to operate.
This combination heats the oven rapidly. If you use more than one rack at a
time, switch the position of the dishes halfway through the cooking process.
ECO mode
The back heating element is turned on and the fan starts working, ensuring
a smooth and uniform heat level inside the oven.
This programme is indicated for slow cooking of any type of food with
temperatures which can be set up to a maximum of 200°C; the programme
is also suitable for heating food and to complete the cooking process.
The programme is particularly suitable for the slow cooking of meat and fish, as
it allows you to have softer meat and save energy at the same time. For a better
energy effectiveness, when the product is turned on, the light stays on only
for 30 seconds; in order to turn the light back on, please press the
SUCCESS cooking modes
! The temperature and cooking duration are pre-set values, guaranteeing
a perfect result every time - automatically. These values cannot be adjusted
and use the C.O.P.® (Programmed Optimal Cooking) system. The cooking
cycle stops automatically and the oven indicates when the dish is cooked. You
may start cooking whether the oven has been preheated or not. The cooking
duration can be customised according to personal tastes, modifying it - before
the start time - by ±5/20 minutes depending on the selected programme.
Once cooking has begun, it is still possible to modify its duration. If the value
is modified before cooking begins, it is stored in the appliance memory and
suggested again when that cooking mode is next used. If the temperature
inside the oven is higher than the suggested value for the selected mode, the
text "Hot" appears on the TEMPERATURE display and it will not be possible
to begin cooking; wait for the oven to cool.
! When the cooking stage has been reached, the oven buzzer sounds.
! Do not open the oven door as this will disrupt the cooking time and
temperature.
BEEF mode
Use this function to cook beef and pork. Place the food inside the oven while
it is still cold. The dish may also be placed in a preheated oven.
30
CAKES mode
This function is ideal for cooking desserts which are made using natural yeast,
baking powder and desserts which contain no yeast. Place the dish in the
oven while it is still cold. The dish may also be placed in a preheated oven.
Using the Small Space and Main Space at the same time
! Simultaneous operation is only possible when using CREATION cooking
modes.
Starting the oven
For simultaneous use, simply start a cooking mode for both cavities in
succession. The TEMPERATURE display shows the cooking parameters
for both cavities.
! Thanks to the high energy efficiency of the appliance, it only takes around
15 minutes for the SMALL SPACE cavity to preheat.

Programming cooking

! A cooking mode must be selected before programming can take place.
Programming the cooking duration
1. Press the icon until the
display begin to flash.
2. Turn the TIMER knob towards " " and " " to adjust the time as desired;
keep the knob in position to scroll through the numbers more quickly and
make the setting process easier.
3. Once you have reached the desired duration, press the
The DISPLAY will show the duration and set temperature alternately.
4. Press the icon to begin cooking.
5. When cooking has finished, "END" appears on the DISPLAY and a buzzer
sounds.
icon.
• For example: it is 9:00 a.m. and a duration of 1 hour and 15 minutes is
programmed. The programme will stop automatically at 10:15 a.m.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking end time can be scheduled.
! For the delayed programming to work properly, the clock should be set to
the correct time.
1. Follow steps 1 to 3 to set the duration as detailed above.
2. Press the icon twice: the
display will begin to flash.
3. Turn the TIMER knob towards " " and " " to adjust the cooking end
time value.
4. Once you have reached the desired end time, press the
The DISPLAY will show the duration, the cooking end time and the set
temperature alternately.
5. Press the icon to activate the programmed mode.
Programming has been set when the
The DISPLAY shows the cooking end time and the cooking duration alternately.
6. Once cooking has finished, "END" appears on the display and a buzzer
sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is
programmed, while the end time is set to 12:30. The programme will
start automatically at 11:15 a.m.
To cancel programming press the
icon and the numerical digits on the
icon again.
icon and the numerical digits on the
icon again.
and icons are illuminated.
icon.