Mettler Toledo IND560 Guia De Instalacion página 7

PRECAUTIONS
•
READ this manual BEFORE operating or servicing this equipment and FOLLOW
these instructions carefully.
• SAVE this manual for future reference.
FOR CONTINUED PROTECTION AGAINST SHOCK HAZARD CONNECT TO
PROPERLY GROUNDED OUTLET ONLY. DO NOT REMOVE THE GROUND
PRONG.
IN ORDER TO INSTALL THE DIVISION 2 APPROVED IND560 PANEL-
MOUNT OR HARSH TERMINAL UTILIZING THE U.S. APPROVAL, METTLER
TOLEDO CONTROL DRAWING 72186884R MUST BE FOLLOWED WITHOUT
EXCEPTION. IN ORDER TO INSTALL THE CATEGORY 3 IND560 PANEL-
MOUNT OR HARSH TERMINAL UTILIZING THE EUROPEAN APPROVAL, THE
DEMKO APPROVAL CERTIFICATE 06ATEX0514991X AND ALL LOCAL
REGULATIONS MUST BE FOLLOWED WITHOUT EXCEPTION. FAILURE TO
DO SO COULD RESULT IN BODILY HARM AND/OR PROPERTY DAMAGE.
REFER TO THE IND560 DIVISION 2 AND ZONE 2/22 INSTALLATION GUIDE
64060405 FOR ADITIONAL INFORMATION.
EARLIER MODELS OF THE IND560 TERMINAL THAT ARE NOT MARKED
(FACTORY LABELED) AS DIVISION 2 OR EUROPEAN CATEGORY 3
APPROVED MUST NOT BE INSTALLED IN A DIVISION 2 OR ZONE2/22
ENVIRONMENT.
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I, DIVISION 2,
GROUPS A, B, C AND D; CLASS II, GROUPS F AND G; CLASS III
HAZARDOUS LOCATIONS OR NON-HAZARDOUS LOCATIONS ONLY.
SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I,
DIVISION 2.
DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN
SWITCHED OFF, OR THE AREA IS KNOWN TO BE NON-HAZARDOUS
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!