Mettler Toledo IND560 Guia De Instalacion página 30

IND560 Installation Manual
Ability to store up to 100 Permanent Tare IDs
•
Totalization of Permanent Tare IDs
•
One-Step processing of Temporary IDs
•
Reprint of previous transaction ticket
•
Inbound Weight, Date and Time available on both inbound and
•
outbound tickets
Storage of up to 2000 transactions
•
Additional information can be found in the Drive-560 Manual on the documentation
CD that accompanies an IND560drive terminal.
Dyn-560
The Dyn-560 optional modules are specialized application solutions used for in-
motion weighing of conveyor-born packages. They can be used with up to four
350 Ω load cells, and are compatible with the METTLER TOLEDO 9477 weighing
conveyor. The IND560dyn is a stand-alone terminal. When that terminal is
packaged with a variety of I/O options, it is known as the IND9D56. Both types are
equipped with a version of the Dyn-560 software, which can be specified in either
ExpressWeigh
ExpressWeigh functionality provides accurate in-motion package weighing with ID
and additional data input. ExpressCheck includes an enhanced version of
ExpressWeigh, and adds the ability to perform three-zone over/under
checkweighing, using comparisons with a Target Table.
Additional information can be found in the Dyn-560 manuals found on the
documentation CD that accompanies an IND560dyn or application software kit.
Special Requirements for Using Drive-560, Dyn-
560 and FillPlus-560
Required Firmware Version
The Drive-560, Dyn-560 and FillPlus-560 applications are written using Task
Expert™. To run a TaskExpert application, the IND560 must have version 3.xx
firmware or higher installed.
Required Mainboard Version
In addition to the software, the IND560 must have a main board version (V0.8)
installed. V0.8 main boards include 8MB of Flash Memory. The version can be
checked by pressing the Recall Info softkey
and looking at the details for the analog or IDNet board under Hardware – Scale
,
Type. If there is a (V0.8) after the Analog L/C or IDNet text, the main board
contains the 8MB Flash Memory and will support running a TaskExpert
application. If the version is (V0.2) or there is no version shown, there is only 4
1-16
® ®
or ExpressCheck form.
then the System Information softkey