Using The Machine - Clatronic DBS 2521 Instrucciones De Servicio

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
38419-05-DBS 2521
List of Parts
1 Temperature control
2 Steam control
3 Pump button with lock
4 Spray button
5 Spray nozzle
6 Steam-jet button
7 Control lamp
Clean the ironing base with a slightly damp cloth.
In order to remove all residues before initial use, please pass the iron a few
times over an old clean cloth.
Press button (14) and remove the water tank. Fill the water tank by the filling
aperture (9) with not more than one litre of pure water.
NOTE: If no steam comes out when the first time the machine is used and all
instructions have been followed, keep the pump button pressed (3) for approx.
one minute so that the water is pumped from the water tank into the iron. It is
also possible to lock the pump button (3) in place. Then steam should come out.
Ironing without Steam
The clothes to be ironed should be sorted out according to their ironing
temperature.
1. Turn the steam control to the middle position "0".
2. Please begin with the lowest temperature. This can be set on the temperature
regulator (1):
Synthetic materials, silk (low temperature)
• •
Wool
• • • Cotton, linen
3. Place the machine on the iron well (10).
4. Insert the plug into a correctly installed safety power socket, 230 V, 50 Hz. The
control lamp of the machine (13) shows the mains connection.
5. The control lamp of the iron (7) shows it is being heated up. As soon as the con-
trol lamp goes off the operating temperature has been reached. Now you can
start ironing.
6. Always remove the mains plug after using the machine.
Steam Ironing
1. Turn the temperature control (1) to position "• • •" (cotton, linen).
2. Turn the steam control (2) to the desired steam quantity.
3. Press and lock the pump button (3) in position. Steam operation begins.
4. With the button (6) it is possible to produce a short, powerful jet of steam.
16.01.2003 16:44 Uhr
First Use of the Machine
8 Removable water tank
9 Filling inlet and anti-limestone cartridge
10 Iron well
11 Mains lead
12 Connecting tube
13 Power indicator light
14 Unlocking button

Using the Machine

(medium temperature)
(high temperature)
Seite 29
29
GB
Tabla de contenido
loading

Tabla de contenido