Pioneer CDJ-900 Manual De Instrucciones página 9

c TIME MODE/ AUTO CUE (page 15)
When pressed once, the main unit display's time display mode (remaining
time display or elapsed time display) switches.
When pressed for over 1 second, auto cue turns on and off.
d Main unit display (page 10)
e BROWSE (page 18)
Press this to display the [BROWSE] screen.
f TAG LIST (page 18)
Press this to display the [TAG LIST] screen.
g INFO (page 19)
Press this to display the [INFO] screen.
h MENU/UTILITY (page 20)
When pressed once, the menu screen is displayed.
The [UTILITY] screen is displayed when this is pressed for over 1 second.
i BACK (page 18)
Press this once to return to the previous screen.
Press for over 1 second to move to the top layer.
j TAG TRACK/ REMOVE (page 18)
Use these to add and remove tracks from the tag list.
k Rotary selector
When selecting tracks or setting items, the cursor moves when the rotary
selector is turned. Press the rotary selector to enter.
l STANDBY indicator (page 20)
This lights when in the standby mode.
m DISC EJECTh and DISC EJECT indicator (page 13)
Use this to eject discs.
n VINYL SPEED ADJUST (page 17)
Use this to adjust the speed at which playback slows down and stops when
the top of the jog dial is pressed and the speed at which normal playback
resumes when the top of the jog dial is released.
o CUE/LOOP CALLc/ d (page 16)
Use these to call out cue and loop points stored on the USB device.
DELETE (page 16)
Use this to delete cue and loop points stored on the USB device.
MEMORY (page 16)
Use this to store cue and loop points on the USB device.
p JOG MODE and VINYL indicators (page 17)
The mode switches between VINYL and CDJ each time this is pressed. The
indicator lights when the VINYL mode is selected.
q SLIP (page 17)
When turned on, normal playback continues in the background with the origi-
nal rhythm during scratch play, loop playback and reverse playback.
r TEMPO ±6/±10/±16/WIDE (page 14)
Use this to switch the playing speed adjustment range.
s MASTER TEMPO (page 14)
Use this to turn the master tempo function on and off.
t TEMPO (page 14)
Use this to adjust the track playing speed.
u Jog dial (– REV/ + FWD) (page 16)
This can be used for such operations as scratching, pitch bending, etc.
v Jog dial display section (page 10)
Rear Panel
w POWER wON vOFF
Press to turn the power on and off.
x AUDIO OUT L/ R (page 11)
Connect the audio cables (included) here.
y AC IN (page 11)
Connect this to a power outlet.
Connect the power cord after all the connections between devices have been
completed.
Be sure to use the included power cord.
z CONTROL (page 17)
Connect the control cord (included) here.
A Kensington security slot
B DIGITAL OUT
Connect a digital coaxial cable here.
C LINK (page 11)
Connect the LAN cable (included) here.
D USB (page 11)
Connect to a computer.
Front Panel
E Disc insertion slot
F Disc force eject pin insertion hole
About ejecting discs by force
! If the disc cannot be ejected by pressing [DISC EJECTh], the disc can be
ejected forcibly by inserting the disc force eject pin all the way into the disc
force eject pin insertion hole on the main unit's front panel.
! When forcibly ejecting a disc, be sure to do so following the procedure below.
1 Press [POWER] and wait at least 1 minute after the set's
power has turned off.
Never forcibly eject a disc directly after turning off the set's power. Doing so is
dangerous for the reasons described below.
The disc will still be spinning when ejected and could hit your fingers, etc.,
causing injury.
Also, the disc clamp will rotate in an unstable way, and the disc could get
scratched.
2 Use the included disc force eject pin. (Do not use anything
else.)
The included disc force eject pin is mounted on the CDJ-900's bottom panel.
When the pin is inserted all the way into the insertion hole, the disc is ejected 5
mm to 10 mm out of the disc insertion slot. Grasp the disc with your fingers and
pull it out.
9
En