Cleaning; Troubleshooting - Silvercrest SHLF 2000 B2 Instrucciones De Servicio

7. Cleaning

In order to enjoy your device for a long time,
you should regularly clean it.
DANGER! Risk of electric
shock!
Disconnect the mains plug before any
cleaning.
DANGER! Risk of injury
through burning!
Allow the device to cool down.
WARNING! Risk of material damage!
Do not use any astringent or abrasive
cleaning agents.
1. Carefully remove larger dust deposits
from the protective grids 2 and 7 using
a vacuum cleaner.
2. Remove the residue with a soft brush.
Ensure that no dust falls into the interior
of the device. Therefore, hold the de-
vice, which you are cleaning, in such a
way that the protective grid 2 / 7
shows downwards.
3. Clean the outside of the device with a
damp cloth. You can also use some de-
tergent.
4. Use a cloth dampened in clear water
for wiping afterwards.
5. Do not use the device until it is com-
pletely dry again.

8. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Possible causes /
Fault
• Fuse or wall socket
faulty? Choose a dif-
The device can- ferent wall socket.
not be • Defective device? Take
switched on. it to a specialist work-
shop for repair, or dis-
pose of the device.
• Electronic component
The device faulty? Take it to a spe-
cannot be cialist workshop for re-
switched off. pair, or dispose of the
device.
• Safety switch has trig-
gered: put the device
into its upright position
(see "Safety switch"
Device switch- on page 52)
es off automati- • Overheating protec-
cally. tion has triggered: let
device cool down and
then clean it (see
"Overheating protec-
tion" on page 52)
Action
53
GB