Pratissoli MK Serie Manual De Reparación página 43

Remove the ring gear (pos. , Fig. 12). If necessary, it is
possible to use an extractor hammer to be applied on the 2
M8 holes (pos. , Fig. 12).
Remove the tab from the shaft (pos. , Fig. 13).
Remove the pinion using an extractor hammer to be applied
on the M14 hole (pos. , Fig. 14).
Fig. 11
Raise the tab of the safety washer (pos. , Fig. 15).
Fig. 12
Insert a shim under the con-rod to block shaft rotation
(pos. , Fig. 16).
Fig. 13
43
Fig. 14
Fig. 15
Fig. 16