Petsafe PIF45 Manual De Adiestramiento Y Funcionamiento página 7

Transmitter: Transmits the radio signal and is the centre of the Pet Area.
Power Light: Indicates when the Transmitter is on.
Power Jack: Where the Power Adaptor plugs into the Transmitter. The Transmitter is powered by a standard
AC outlet.
Boundary Switch: Adjusts the size according to the size of the Pet Area desired. Note: Adjusting the switch
does not change the level of Static Stimulation on the Receiver Collar.
Boundary Control Dial: Adjusts the distance from the Transmitter to the Boundary Zone. Note: Adjusting the
dial does not change the level of Static Stimulation on the Receiver Collar.
Alarm Disable Button: Silences Power Loss Alarm and re-initiates the Transmitter radio signal after Metal
Interference Alarm activates.
Power Loss Alarm: Sounds an intermittent single tone alarm which indicates power has been removed from
the Transmitter.
Metal Interference Alarm: Disables the Transmitter radio signal to protect the Transmitter from damage if
placed too close to metal objects.
Transmission Failure Alarm: Continuous tone which indicates a Transmitter problem.
Transmitter
Power
Light
Power
Jack
Boundary Boundary
Switch Control Dial
www.petsafe.net
Alarm
Disable
Button
ALARM
ALARM
LOW HIGH
7