How The System Works; Key Definitions - Petsafe PIG19 Manual De Funcionamiento Y De Adiestramiento

How the System Works

A radio signal travels from the Fence Transmitter through a buried wire, marking the boundaries you wish to set for your dog.
Your dog wears a Receiver Collar that detects the signal at the boundary. As your dog approaches the boundary, the Receiver
Collar issues a warning tone. If he proceeds further, he receives a safe but startling Static Stimulation. While harmless, the
stimulation will persuade him to stay in the containment area you've established. Boundary flags are a temporary visual aid for
your pet; remove them after training. This PetSafe
for pets over 3.6 kg.

Key Definitions

Fence Transmitter: Transmits the radio signal through the Boundary Wire.
Pet Area: Area within the Warning Zone where your pet can roam freely.
Warning Zone: Outer edge of the Pet Area where your pet's Receiver Collar begins to beep, warning him not to go into the
Static Stimulation Zone.
Static Stimulation Zone: Zone beyond the Warning Zone where your pet's Receiver Collar will emit a Static Stimulation,
signalling him to return to the Pet Area.
Boundary Width: Combination of the Warning Zone and the Static Stimulation Zone.
Receiver Collar: Receives the radio signal from the Boundary Wire.
Stimulation Level Button: Adjusts the level of Static Stimulation your pet receives in the Static Stimulation Zone.
Receiver Indicator Light: Indicates the level of stimulation at which the Receiver Collar is set. This light also serves as a low
battery indicator.
Contact Points: Deliver the safe Static Stimulation when your pet moves into the Static Stimulation Zone.
Power Jack: Where the Power Adaptor plugs into the Fence Transmitter.
Boundary Control Switch: Switch located on the Fence Transmitter to adjust according to the length of Boundary Wire used.
Boundary Wire Terminals: Where the Boundary Wires connect to the Fence Transmitter in order to complete a
continuous loop.
Loop Indicator Light: Indicates that the Boundary Wire makes a complete loop, enabling the signal to be transmitted.
Boundary Width Control: Adjusts the width of the Warning and Static Stimulation Zones. Note: Adjusting the knob does not
change the level of Static Stimulation on the Receiver Collar.
Fence Transmitter
Pet Area
Static Stimulation Zone
Warning Zone
Boundary Wire
6
In-Ground Fence
®
Receiver Collar
Static
Stimulation Level Button
Stimulation Zone
Warning Zone
Boundary
Width
Washers
System has been proven safe, comfortable, and effective
™
Receiver
Battery
Indicator Light
Contact Points
www.petsafe.net
Fence Transmitter
}
Loop Indicator Light
Power Light
Power Jack
Boundary Width Control
Boundary
Control Switch
Boundary
Wire Terminals