Button Function - Faber CHLOE Serie Instrucciones De Instalación

For Best Results
for several minutes after cooking is complete to clear all smoke and odors from the kitchen.
L

Button Function

Turns the lights on/off at maximum strength.
L
Press and hold the button for approximately 2 seconds to dim the Lights On/Off.
T1 Turns the motor on/off at speed one.
T2 Turns the Motor on at speed two.
Press and hold the button for approximately 5 seconds, with all the loads turned off (Motor and
To turn the alarm off, press the button again and hold for at least 5 seconds. The relevant LED
Turns the Motor on at speed three.
T3
Press and hold the button for approximately 3 seconds, with all the loads turned off (Motor and Lights), Flashing
T4 Turns the Motor on at INTENSIVE Speed.
This speed is timed to run for 6 minutes. At the end of this time, the system returns automatically to
the speed that was set before. If it is activated with the motor turned off, the hood will switch to OFF
at the end of the time.
S1
The alarm is triggered after the Hood has been in operation for 100 working hours.
When this is activated, it signals the Activated Charcoal Filter saturation alarm, indicating that the
saturation alarm comes into operation after the Hood has been working for 200 hours.
26
USE AND CARE INFORMATION
T1 T2 T3 T4
S1
Led
-
-
-
-
Flashing
-
-
Flashing
Fixed
Flashing