Checking The Indicators On The Projector - Sony VPL-PX15 Manual De Instrucciones

Operations from a Computer
SETTINGS window
x For VPL-PX15
The ASPECT (4:3, 16:9) and STATUS (ON, OFF)
buttons function the same as the settings in the
menu.
x For VPL-FX50
The ASPECT (4:3, 16:9) and LAMP MODE
(STANDARD, LOW) buttons function the
same as the settings in the menus.
For details, see the Operating Instructions of the
projector.
3
Click the button to adjust or set.
Checking the Indicators on the
Projector
You can check the present status of the indicators on
the control panel of the projector on a computer
display.
1
Start Internet Explorer 4.0 or later versions, or
Netscape Navigator 4.5x or 4.7x version on the
computer.
2
Type "http://xxx.xxx.xxx.xxx (for the IP address of
the projector)/info" as a URL.
If you do not change the factory-set IP address,
type "http://192.168.0.1/info" (when using a LAN
PC card) or "http://192.168.0.2/info" (when using
the ETHER connector).
If the password is set, the password setting dialog
box appears.
28
(GB)
3
Enter the name and password of the Administrator.
The Information window appears.
The illustration below is for the VPL-PX15.
(VPL-PX15)
1 Projector Status
Shows the present status of the projector.
2 Projector
Shows the information on the projector.
3 System
Shows the versions of the Windows CE and
application currently used.
4 UPDATE button
Click to update the latest information.
5 Error Status
Shows the present status of the indicators on the
control panel of the projector.
For information on the indicators, see the Operating
Instructions.
2
3 4
1
5