Attaching The Projector To The Adjustment Bracket - Sony PSS-650 Manual De Instalación

Notes
• Place the projector on a cloth or other material to
prevent scratching the projector or the table surface.
• The BSW 5×12 screws (d) support the projector from
falling. Always attach securely.
Attaching the Projector to the
Adjustment Bracket
6
Insert the projector mounting bracket (C), with the
projector attached, into the hooks of the adjustment
bracket assembled in steps 1 to 4.
7
Attach the projector mounting bracket to the
adjustment bracket at the four locations on the left
and right.
Tighten the four M6×16 bolts (e), in the order 1 to
3.
(e)
1
(e)
2
Note
If projector height adjustment is required, disassemble
using steps 1 to 7 in the reverse order, and then
reassemble from the beginning.
24
Attaching to the Ceiling
(C)
(e)
3
(e)
3