Maintenance And Cleaning; Electric Shock - Abicor Binzel iROB Feed 22/MP Instructivo De Servicio

9 Maintenance and cleaning

9 Maintenance and cleaning
Under normal operating conditions, the wire feeder does not require maintenance. Scheduled maintenance
and cleaning, however, is a prerequisite for a long life and a trouble-free operation.
Risk of injury due to unexpected start-up
The following instructions must be adhered to for the entire duration of maintenance, servicing, mounting,
dismounting and repair work:
• Switch off the power source.
• Close the gas supply.
• Close off the compressed air supply.
• Disconnect all electrical connections.
• Switch off the entire welding system.

Electric shock

Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• The maintenance intervals given are standard values and refer to single-shift operation.
• Maintenance and cleaning work may only be carried out by qualified personnel
• Always wear your personal protective equipment when performing maintenance and cleaning work.
EN - 22
DANGER
DANGER
(in Germany see TRBS 1203).
iROB Feed
BAL.0331.0 • 2019-03-11