Operation; Operating Elements En - Abicor Binzel iROB Feed 22/MP Instructivo De Servicio

7 Operation

7 Operation
NOTICE
• The device may only be operated by qualified personnel (in Germany see TRBS 1203).
• Observe the operating instructions of the welding components, such as the robot welding power
The wire feeder can only be put into operation in connection with the complete robot welding system
iROB Pulse.
7.1 Operating elements
When using the RPC connection, please observe the following chapter and the warning Risk of burns:
 4 Scope of delivery on page EN-9
Risk of burns
Warning against hot surfaces. The RPC connection is hot after operation.
• Wear protective gloves.
• Euro central connector = air-cooled and liquid-cooled
Tab. 14
1
13
12
9
11
1 Central connection
2 Compressed air output
3
Gas inlet G1/4"
Fig. 11 Operating elements
EN - 20
,
source iROB Pulse coolant recirculator iROB Cool and welding torch.
WARNING
Central connector versions
2
Torch side
10 9
4 Control lead connection
intermediate cable assembly
5
Compressed air inlet
6 Wire inlet
• PPC = air-cooled
3
8
7
7 Coolant supply connection
8 Coolant return connection
9
Control lead connection
welding torch
iROB Feed
4
Supply side
5
6
10 Air-blast trigger
11 Gas test trigger
12 Inching trigger
13 Wire return
BAL.0331.0 • 2019-03-11