Mondolfo Ferro AQUILA ALLIANCE Manual De Uso página 110

Positioning the tool head (Fig. 26a)
A - Operate pedal
the tool head into the working position.
The tool is already in the correct position for
mounting the tyre, unless the type of rim has
been changed.
Mounting the bottom bead (Fig. 26b)
A - Place the bottom bead of the tyre under-
neath the tool and at the same time apply
a little pressure to the tyre by hand while
starting to rotate the wheel
15 Fig.10) for easier bead insertion.
B - Rotate until tyre mounting is complete.
Positioning the top bead (Fig. 26c)
- Position the top bead of the tyre as clearly
shown in fig. 26c.
Take care that the tyre does not slip underneath the tool.
110
(13, Fig. 10) to move
(pedal
NOTICE
AQUILA ALLIANCE User Manual
26a
26b
26c