Information About Scrapping; Environmental Information - Mondolfo Ferro AQUILA ALLIANCE Manual De Uso

The lubricant flow-rate is adjusted by turning the screw on part "L", (fig.40b); normally
this unit is precalibrated to a pressure of 10Bar, with SAE20 viscosity lubricant in order
to make a drop of lubricant come out, which can be seen from the specific cover, every
4 times the bead breaker is operated.
Periodically check the lubricant level through the specific windows and top up as shown
in fig.40c. Top up only with non-detergent SAE20 oil equal to 50cc.
The filter regulator "FR" has an automatic condensation drain system, therefore in condi-
tions of normal use special maintenance is not required. The condensate may however
be drained manually at any time (fig.40d).
Normally the cups do not need to be removed, but check if this is necessary for mainte-
nance operations after a long period of use. If a manual operation is not sufficient, use
the specific key provided (fig.40e).
Clean with a dry cloth. Avoid contact with solvents.
Keep the work area clean.
Never use compressed air, water jets or solvents to remove dirt or deposits from the
machine. When cleaning the area, take steps to avoid building up and raising dust as
far as possible.

9. INFORMATION ABOUT SCRAPPING

If the machine is to be scrapped, remove all electrical, electronic, plastic and metal parts
Dispose of them separately, as provided for by local regulations in force.

10. ENVIRONMENTAL INFORMATION

The following disposal procedure must be applied to the machines having the crossed-
out bin symbol on their data plate.
This product may contain substances that can be hazardous to the environment and to
human health if it is not disposed of properly.
We therefore provide you with the following information to prevent releases of these
substances and to improve the use of natural resources.
Electrical and electronic equipment should never be disposed of in the usual municipal
waste but must be separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product and on this page,
reminds the user that the product must be disposed of properly at the
end of its life.
This prevents the inappropriate disposal of the substances which this
product contains, or the improper use of some of them, from having
hazardous consequences for the environment and human health. Fur-
thermore, this helps to recover, recycle and reuse many of the materials
AQUILA ALLIANCE User Manual
NOTICE
123