Mondolfo Ferro AQUILA ALLIANCE Manual De Uso página 108

- Operate the pedal
demounted from the rim (E Fig. 23).
Demounting the bottom bead (Demounting using the bead breaker disc)
- Operate control
with the top bead of the rim (A-B Fig. 24).
- Obtain disc penetration by keeping button
pressed 6 Fig. 10a (C Fig.24).
- Start to rotate the wheel
Fig.10) and at the same time raise the disc
a little at a time
the tyre is completely demounted (D Fig. 24).
Demounting the bottom bead with upper
arm (for reverse rims)
In the case of reverse rims, the machine range
can be increased using the upper bead-breaker
unit to extract the lower bead:
- Open the bead-breaker unit (10, Fig. 10)
using control
- Turn the bead-breaker disk by 180° (Fig. 25).
- Move the bead-breaker arm from on top to
under the wheel (Fig. 25a).
- Close the bead-breaker unit (10, Fig. 10)
using control
- Extract the lower bead (Fig. 25b).
108
(15 Fig.10) to rotate the wheel until the tyre is completely
(3 Fig. 10a) and raise the bottom bead of the tyre until it is level
(pedal 15
(3 Fig.10a). Rotate until
(7 Fig. 10a).
(7 Fig. 10a).
AQUILA ALLIANCE User Manual
25
25a
25b