Mounting - Mondolfo Ferro AQUILA ALLIANCE Manual De Uso

- After completing removal, set the lower bead-breaker arm totally downwards
10a).
- Open the bead-breaker unit
- Tilt back the column
Any noise heard when the tool head engages with the tyre is normal. The noise is
made by the mechanical return of the tool and not because the tool has hit the rim.
Even if the tool does touch the rim as the tyre is engaged, this will not damage the
rim in any way. The pressure applied is very low.

6.7. MOUNTING

EXPLOSION HAZARD. Always check that the tyre/rim combination is correct in terms
of compatibility (tubeless tyre on tubeless rim, tube type tyre on tube type rim) and
geometrical size (keying diameter, cross-section width, Off-Set and shoulder profile)
before mounting.
AVOID PERSONAL INJURY OR DEATH.
Also check that rims are not deformed, that their fixing holes have not become oval, that
they are not encrusted or rusty and that they do not have sharp burrs on the valve holes.
Check that the tyre is in good condition with no signs of damage.
Preparing the tyre
(Fig. 26)
A - Grease both the
tyre beads.
B - Place the tyre on
the rim.
AQUILA ALLIANCE User Manual
(7 Fig. 10a) and demount the tyre.
(pedal 13 Fig.10) and remove the tyre.
NOTICE
DANGER
A
(3 Fig.
B
26
109