General Power Tool Safety Warnings - Makita BTP130 Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Capacities
Impact driver
mode
Hammer drill
mode
Capacities
No load
speed (RPM)
Drill mode
Capacities
Screw driver
mode
Capacities
Standard battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Model
Max. fastening torque
Machine screw
Standard bolt
High tensile bolt
No load speed (RPM)
Impacts per minute
No load speed (RPM)
Blows per minute
Concrete
High (2)
Low (1)
Steel
Wood
No load speed (RPM)
Machine screw
Overall length
Net weight
Rated voltage
BTP130
135 N•m (100 ft.lbs)
0 - 2,400 /min
0 - 2,400 /min
0 - 28,800 /min
0 -2,400 /min
High (2)
Low (1)
High (2)
Low (1)
0 - 2,400 /min
1.7 kg ( 3.8 lbs)
D.C. 14.4 V
BL1430
GEA006-2
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
2
140 N•m (103 ft.lbs)
4 mm - 8 mm (5/32" - 5/16")
5 mm - 14 mm (3/16" - 9/16")
5 mm - 12 mm (3/16" - 1/2")
0 - 2,300 /min
0 - 3,200
0 - 2,300 /min
0 - 27,600 /min
8 mm (5/16")
0 -2,300 /min
0 - 700 /min
6.5 mm (1/4")
10 mm (3/8")
9 mm (11/32")
21 mm (13/16")
0 - 2,300 /min
M4
186 mm (7-3/8")
1.6 kg ( 3.6 lbs)
BL1815
BTP140
1.9 kg ( 4.1 lbs)
D.C. 18 V
BL1830