Abicor Binzel ABIPLAS WELD 250 MT Manual De Instrucciones página 22

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
2 Safety
Designated use
2.1
2.2 Personal protective equipment
(PPE)
2.3 Classification of the warnings
2.4 Special warnings for operation
2.5 Emergency information
3 Product description
Technical data
3.1
Abbreviations
3.2
3.3 Signs and symbols used
3.4 Nameplate
4 Scope of delivery
5 Functional description
6 Putting into operation
Setting up the
6.1
®
ABIPLAS WELD 250 MT torch
body
Tightening the torch body
6.2
Connecting the cable assembly
6.3
to the device
6.4 Connecting the coolant
6.5 Setting the gas flow rate
EN - 2
EN-3 7
EN-3 7.1
7.2
EN-3
EN-3 8
EN-3 9
EN-4 9.1
EN-4 9.2
EN-5
10
EN-5
EN-5 11
EN-7
EN-7
EN-8
EN-8
EN-9
EN-10
EN-10
EN-12
EN-12
EN-13
EN-14
®
ABIPLAS
Operation
Before switching on
Welding process
Putting out of operation
Maintenance and cleaning EN-17
Torch body
Cable assembly
Troubleshooting
Disposal
BAL.0311 • 2018-02-05
WELD 250 MT
EN-15
EN-16
EN-16
EN-16
EN-18
EN-19
EN-20
EN-21