Service And Maintenance - Festool CT 17 E Manual De Instrucciones

CT 17 E
GB
6 Operation
WARNING
Unauthorised voltage or frequency!
Risk of accidents

Observe the specifications on the machine's
name plate.

Observe country-specific regulations.
6.1 Initial operation

Open the locking clips and remove the top sec-
tion of the machine [2].

Remove accessory parts and accompanying
documents [3].

Insert a filter bag [4].
6.2 Connecting the suction hose
For extracting material at the intake opening [1-1]
For blowing out material from the exhaust opening
[1-9]
6.3 Connecting the mobile dust extractor
WARNING
Risk of injury from tools starting up unexpectedly

Before setting the switch to the "AUTO" or
"MAN" position, make sure that the connected
tool is switched off.
The switch [1-2] serves as an on/off switch.
Switch position "0"
Appliance socket [1-4] is disconnected from the
power, mobile dust extractor is switched off.
"MAN" switch position
Appliance socket [1-4] is connected to the power,
the mobile dust extractor starts.
"Auto" switch position
Appliance socket [1-4] is connected to the power,
the mobile dust extractor starts when the connect-
ed tool is switched on.

Insert the plug into an earthed socket.
Pull the plug from the socket when the ma-
chine is not in use and prior to maintenance
and cleaning work.
12
6.4 Connecting electric power tools
WARNING
Risk of injury

Observe the maximum appliance socket con-
nected load (see chapter "Technical data")

Switch off the electric power tool.

Connect the electric power tool to the appliance
socket [1-4].
6.5 Adjusting the suction power

Use the rotary knob [1-3].
7 Working
7.1 Dust extraction
Extracting dry materials
Always use a filter bag.
Extracting wet materials/liquids
Remove the filter bag!
Insert a special wet filter.
The dust extractor stops automatically when the
maximum level is reached.
After wet extraction, allow the main filter to dry!
CAUTION
Escaping foam and fluids

Switch off and empty the machine immediately.
7.2 After finishing work

Switch off the mobile dust extractor and pull out
the mains plug.

Wind up the mains power cable.

Empty the dirt trap.

Place the mobile dust extractor in a dry room in-
accessible to unauthorised users.
8

Service and maintenance

WARNING
Risk of injury, electric shock

Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!

All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.