Service And Maintenance - Festool CT MINI Manual De Instrucciones

WARNING
Any maintenance or repair work that requires
opening of the motor or gear housing should only
be carried out by an authorised Customer Service
Centre (name supplied by your dealer)!

Maintenance or repair work carried out by an
unauthorised person can lead to the wrong con-
nection of the power cord or other components,
which in turn can lead to accidents with serious
consequences.
WARNING
To prevent accidents, always remove the plug
from the power supply socket before carrying out
any changes or maintenance work on the tool!

Do not use compressed air to clean the electrical
tool! Do not try to clean parts inside the tool in
this way, as you could let foreign objects in
through the openings of the tool housing.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festoolusa.com/ser-
vice
EKAT
4 Use only original Festool spare parts!
Order No. at: www.festoolusa.com/
5
3
2
service
1

Clean the level sensors [5-1] and empty the dirt
trap [1-8] regularly.
5
5-1

Service and maintenance

Observe the following instructions:
– The manufacturer or an instructed person must
perform a dust test at least once a year to deter-
mine whether the filter is damaged, the machine
is sealed properly and the monitoring features
are functioning correctly.
– Anything that cannot be cleaned must be dis-
carded in impermeable bags. Observe applicable
disposal regulations!
Motor damage

Never operate the extractor without a filter ele-
ment fitted as the motor may become damaged.

Open the locking clips and remove the top sec-
tion of the machine [6].
6

Changing the filter bag - see printing on filter
bag.

Replace the top section of the machine and
close the locking clips.
Changing the filter bag
NOTE
2
1
1
13