Overview Of Adjustment Parameters In Mymodes - Ottobock C-Brace 17KO1 Serie Instrucciones De Uso

Parameter
Stance function
Sitting function
Volume of acoustic
signal
Pitch of acoustic
signal
INFORMATION
Confirmation of the successful transfer of the parameters
A beep and vibration signal is emitted by the orthosis while changing the parameters using the
Cockpit app. If the parameter "Volume of acoustic signal" is set to "0", only a vibration signal
is emitted.

8.4.3 Overview of adjustment parameters in MyModes

The parameters in the MyMode "User defined" describe the static behaviour of the orthosis for a
specific movement pattern such as cycling. There is no automatically controlled adjustment of the
extension and flexion resistance.
The parameters of the MyModes "Training mode" and "Freeze position" are preconfigured and
cannot be changed.
The following parameters can be modified in MyModes:
Parameter
Flexion resistance
increase
82
Adjustment Cockpit app
range of the adjustment
O&P profes­ range
sional via the
adjustment
app
0/Off - deactiv­
ated
1/On - activ­
ated
0/Off - deactiv­
ated
1/On - activ­
ated
0 to 100 0 to 100
1500 Hz — 1500 Hz —
3000 Hz 3000 Hz
Adjustment Cockpit app
app setting adjustment
range range
0 to 100 +/- 10 of the
configured
value
Meaning
Activation/deactivation of the stance
function. This function needs to be
enabled in the adjustment app.
Activation/deactivation of the sitting
function. This function needs to be
enabled in the adjustment app.
Volume of beep signal for confirma­
tion tones (e.g. when switching
MyModes). The "0" setting deactiv­
ates the audible feedback signals.
However, warning signals are still
generated if errors occur.
Pitch of beep signal for confirmation
tones
Meaning
Value for speed at which flexion resist­
ance increases as the knee angle
increases
This parameter can only be changed
in the MyMode "User defined".