Unit Installation; Installation Of Additional Fi Lters / Relace Of Fi Lters - S&P UVF ECOWATT Serie Manual Del Usuario

7.5. UNIT INSTALLATION

The unit can be mounted on fl oor, wall and false ceiling. To avoid the transmission of vibrations,
anti-vibration devices must be installed. Evaluate the mounting position and the type of surface
on which the unit is mounted. For wall mounting, the unit must be supported on the 4 existing
support points.
7.6. INSTALLATION OF ADDITIONAL FILTERS / RELACE OF FILTERS
Depending on the version, the unit is supplied with one or two fi lters located inside it.In the
versions with a fi lter it is possible to add a second fi lter (order as accessory).In all the versions
it is possible to add a prefi lter. To install the additional fi lters, follow the sequence:
Installing an additional fi lter
The UVF-ECOWATT ventilation boxes allow the assembly of up to 3 stages of fi ltration inside,
located as follows:
To add a second fi lter it is necessary to follow the next steps:
A. Filter holder with clamping arms in which it is located
the fi lter supplied as standard and that has capacity for
the installation of a second fi lter. In the version F7+F9
both fi lters are factory mounted, so that there is no free
space to mount an additional fi lter.
B. Guide fi lter holder in which it is possible to locate a pre-
fi lter (G4 or M5).
Remove the fi lter access cover by turning and loosening
the existing closing hands on the side (1). Then, tilt the
lid towards the opposite side to the closing hands (2).
21