Unit Confi Guration Via Console; Change Operation Mode - S&P CAB ECOWATT PLUS Manual De Instrucciones

6.6. UNIT CONFIGURATION VIA CONSOLE

6.6.1. Change operation mode

Once the unit is powered, desired language selected and showing screen described above, continue with following sequence:
3"
+
ENTER PASSWORD:
1 1 1 OK
OK OK
CHANGE PASSWORD
SI NO
NO
OK OK
MENU CONFIG
CHANNEL N: 1 OK
At this time we are in confi guration mode and it is possible to navigate and select parameters desired:
FACTORY SETTING?
NO SI
NO
NO
OK OK
MODE
<PI PRESSURE OK
OK OK
Operation: depending on mode selected, displayed parameters will be specifi c to each one. Ending "RTC" modes are only in
combination with programming schedule TIMER RTC accessory.
Press simultaneously for 3"
3
Enter the password
Default: 1 1 1
It is possible to assign a new password to your device
(channel)
Selection on which cannel you want to set the
configuration
Pressing on "YES", it is reloaded factory settings
MODE
PI VOLUME
MODE
PIPRESS+RTC
MODE
PROP.+RTC
MODE
PROPORT.
MODE
PIVOLUME+RTC
MODE
MIN-MAX+RTC
45
MODE
MIN-MAX