Installation; Handling - S&P CACB-N Manual Del Usuario

3. INSTALLATION

3.1. HANDLING

3.2. INSTALLATION
The box must be attached to a fl at support by the side holes provided for this purpose. It is recom-
mended to install it on vibration absorbers and connect it with fl exible sleeves.
The CACB-N can be installed either for horizontal discharge or for vertical discharge by simply
fl ipping the box.
Horizontal
discharge
>C
C
Unpack the box.
To lift it, attach the box with 2 slings to the fi xing straps loca-
ted around the discharge branch.
Vertical The air tight installation of this box and its network should
discharge satisfy the technical conditions defi ned in current regula-
tions.
Important: Make sure that the motor's square cooling holes
(located under the electric connection box) are not obstruc-
ted.
On the fl oor
Provide for a distance greater than or equal to the C dimen-
sion to allow performing maintenance on the motorised fan.
On the ceiling
Provide for a height greater than or equal to the C dimension
to allow performing maintenance on the motorised fan.
EN
13