Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3 INSTALLATION
3.1
Installation on Konfort units
This procedure explains how to install the flushing canister on the Konfort units.
WARNING: Prior opening the Konfort station, make sure that the units is switched-off and its
power cable is disconnected from the main power source.
ACKF01_GB_00
a)
Remove
the
two
screws
fixing
the
control
panel
of
the
Konfort unit.
b) Lift up the control
panel of the Konfort
unit and secure it with
the proper fixing bar.
c)
Unpack
the
installation
kit
and
verify
if
components
are present.
d) On the left lateral
panel and from inside
the unit, position the
metallic
installation
bracket
toward
the
upper
line
of
ventilation holes.
e) Position the two
screws with the two
aluminium
rings.
Tight them with the
required tool.
all
TEXA S.p.A.
f) Present the flushing
canister
toward
the
two aluminium rings
which you have just
installed on the left
side of the unit.
g) The two aluminium
rings
should
be
inserted in the two
holes present on the
base
plate
of
the
canister.
h)
Once
the
two
aluminium
rings
are
inserted, the canister
should slide down and
finally
sit
on
the
surround of the rings.
i)
Now
the
main
component
of
the
flushing kit is installed
on the Konfort unit
ready for use.
It can still be easily
removed in case of
non-frequent use.
68/122
Capítulos
Tabla de contenido
