TEXA ACKF01 Manual Del Usuario página 108

SINGLE FLUSHING:
is used in case of small contamination and / or simple oil / UV additive removing.
MULTIPLE FLUSHING: This program mode is performing tree consecutive flushing cycles.
(Except vacuum, this will be performed only one time at the beginning). This configuration is
used in case of heavy contamination due to a major failure as compressor damage.
After having selected the required flushing mode,
The Display shows:
C o n n e c t
h o s e t o
C o n n e c t
h o s e t o
Press Enter to confirm.
The Display shows:
O p e n L P / H P
E N T E R t o
Press Enter to confirm.
The vacuum phase starts automatically...
The Display shows:
F l u s h i n g
V a c u u m .
T i m e
Vaccum timer and absolute pressure in the system are indicated.
Default vacuum time is 5 minutes, but it can be shorted by
pressing UP / DOWN. You can also completely cancel and
quit the program by pressing the Stop button.
ACKF01_GB_00
INTRODUCTION TO FLUSHING MODES:
T
his program mode is performing one flushing cycle. This configuration
H P s e r v i c e
s y s t e m
L P s e r v i c e
cs a n i s t e r
v a l v e s .
c o n f i r m .
0 0 : 0 0 : 0 0
m B . x x x x
TEXA S.p.A. 108/122